Skip to main content
Get a Quote

BIS liaison for exporters to India

Exporting to India? Get your BIS certification with Gulshan Marwah

Many products can only be imported into India with a valid certificate or registration from the Bureau of Indian Standards (BIS). Without it, customs will not clear your shipment. We manage the whole BIS process for foreign manufacturers — from checking whether your product needs BIS to getting your licence.

What goes on the product
  1. IS numberThe Indian Standard the licence covers.
  2. ISI markThe Standard Mark — only on goods covered by the licence.
  3. Licence numberCM/L-... on the product and/or its packaging.
Illustration of a sample label for the ISI mark (FMCS) — numbers are placeholders.

No BIS, no customs clearance

The two main routes for foreign manufacturers.

DetailFMCSISI markCRSR-number
Typical goodsSteel, toys, footwear, cables, appliancesElectronics, IT goods, LED lamps, batteries, solar
Factory visitYes, by BIS officersNot normally required
TestingBIS or BIS-recognised labsBIS-recognised labs only
Time from complete applicationAbout 6 monthsAbout 20 working days, plus lab testing
Indian representativeMandatoryRequired

Who we help

Exporting to India or importing into India?

BIS rules affect both sides of the shipment. The licence belongs to the factory, but a missing licence stops the importer's goods at the port.

Exporting to India — manufacturers abroad

  • Find out whether your product is under a BIS Quality Control Order, and which Indian Standard and scheme apply
  • We arrange the Authorised Indian Representative (AIR) the BIS rules require for foreign manufacturers
  • Testing in BIS-recognised labs in India, factory inspection support (ISI / FMCS) and filing on the BIS portal
  • Your licence or registration in place before the goods land, so your buyer's shipment clears customs
Get help with your BIS certification →

Importing into India — Indian importers

  • Check before you place the order: will this product clear Indian customs without BIS?
  • The licence must be held by the actual manufacturer for its own factory — we coordinate the certification with your overseas supplier
  • For CRS electronics, a major importer or distributor with a marketing tie-up can act as the AIR when the manufacturer has no Indian office
  • Avoid goods stuck at the port: shipments that land after a QCO takes effect must already be certified and marked
Get help with your BIS certification →

What we do

How we help you get BIS

  1. Check whether your product needs BIS and under which Indian Standard and scheme
  2. Authorised Indian Representative (AIR) support for foreign manufacturers
  3. Prepare and file your application and documents on the BIS portal
  4. Arrange sample testing in BIS-recognised laboratories in India
  5. Coordinate the BIS factory inspection: schedule, travel and on-site support
  6. Follow up with BIS until your licence or registration is granted — then renewals

Schemes

BIS schemes for foreign manufacturers at a glance

Summary for guidance, checked on October 28, 2026. BIS rules and Quality Control Orders change — we confirm the exact requirements for your product before you apply.

Foreign Manufacturers Certification Scheme (FMCS) - ISI mark (Scheme-I)

Route at a glance · select a stepAbout 6 months from complete application
Applies to
Products named in a QCO that requires the ISI mark under Scheme-I of the BIS (Conformity Assessment) Regulations, 2018, for example steel products, toys, footwear, cables, many household electrical appliances, helmets and pressure-cooker items. Check the product and its Indian Standard (IS) on the BIS list 'Products under Compulsory Certification - Scheme I'.
Mark on product
ISI mark (Standard Mark) with the IS number and the licence number (CM/L-...) shown on the product and/or its packaging.
Factory inspection
Yes. BIS officers inspect the overseas factory before grant and during surveillance. BIS treats all FMCS visits as special visits; the applicant pays per-man-day charges plus travel, visa, insurance and per-diem costs.
Testing
Samples drawn during inspection may only be tested in BIS's own labs or BIS-recognised labs. The applicant ships them to the lab and pays the testing charges. The factory must also have its own testing facilities, or arrangements approved by BIS, to run the routine testing plan.
Indian representative
Mandatory. The AIR must be an Indian resident: preferably the head or a senior person of the manufacturer's Indian branch or liaison office, or another legally appointed person if there is no such office. The AIR accepts responsibility for compliance with the BIS Act, is named on the licence, must appear before BIS when required, must help BIS draw samples from imported consignments, must have no conflict of interest with testing labs, and can normally represent only one manufacturer (related group companies and importers are an exception). BIS must be told before any change of AIR.
Validity
Under the BIS (Conformity Assessment) Amendment Regulations, 2026 (in the Gazette on 25 February 2026), a Scheme-I licence is granted initially for up to five years and can be renewed for up to five years at a time. Fees are now paid every year in advance with a production statement. If they are late, the licence is automatically suspended for 90 days (this can be cleared by paying with a INR 5,000 late fee) and is then cancelled. Older BIS FMCS pages still mention an initial two-year period; the 2026 regulation replaces that.
Typical time
BIS's FMCS FAQ says a licence is generally granted within about six months of BIS receiving a complete application. Delays can come from incomplete papers, arranging the overseas inspection, and sample testing.

  1. Identify the Indian Standard and QCO that cover the product, and check the product's varieties against that standard.
  2. Nominate an Authorised Indian Representative (AIR) who lives in India, using the BIS nomination format.
  3. Prepare the document set from the BIS FMCS checklist, including recent test reports showing the product meets the Indian Standard.
  4. Apply online on the Manakonline portal and pay the application fee. BIS stopped accepting paper applications after 31 May 2026.
  5. BIS records the application, then BIS officers inspect the overseas factory. The applicant pays all visit costs.
  6. Samples drawn during the inspection are sealed and sent to BIS labs or BIS-recognised labs in India for independent testing, at the applicant's cost.
  7. If the inspection and test results are satisfactory, BIS grants the licence. The licensee accepts the Scheme of Testing and Inspection (STI) and the marking-fee rate, signs the BIS agreement and submits a performance bank guarantee.
  8. Apply the ISI mark only to goods covered by the licence, run the in-factory testing plan, pay annual fees with a production statement, and expect BIS surveillance inspections and market samples.

BIS fee list for FMCS (same as for domestic manufacturers; non-SAARC applicants pay the USD equivalent): application fee INR 1,000 (non-refundable); special visit charges INR 7,000 per man-day, plus ticket, visa, insurance and per-diem costs at BIS rates; contingency fund payment INR 10,000; testing charges as applicable; annual licence fee INR 1,000; renewal application fee INR 1,000; marking fee as applicable to the product. Bank charges and exchange-rate differences are on the applicant. Performance bank guarantee: up to USD 10,000 on the BIS format, issued by a bank with an RBI-approved branch in India and routed through that branch.

Official BIS source (opens in a new tab)

Products

Common products that need BIS

Examples only. If your product is not listed, send it to us and we confirm the exact standard and scheme.

16 products shown

ProductSchemeStandard / order
Steel and steel products (e.g. structural steel, flat products)FMCSSteel and Steel Products (Quality Control) Order, 2024 (S.O. 3716(E)), amended in 2025 and 2026; e.g. IS 2062
Toys for children under 14FMCSToys (Quality Control) Order, 2020; IS 9873 series (non-electric) and IS 15644 (electric toys)
Leather and other-material footwearFMCSFootwear made from Leather and other Materials (Quality Control) Order, 2024 (S.O. 1421(E)); e.g. IS 17043 (Parts 1 and 2):2024
PVC-insulated cables and wires (up to 1100 V)FMCSElectrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003; IS 694
Household electrical appliances (irons, immersion heaters, room heaters, switches, RCCBs)FMCSSame 2003 order; IS 302 (Part 2) series, IS 3854, IS 12640
Electric kitchen appliancesFMCSElectrical Appliances for Kitchen (Quality Control) Order, 2023; e.g. IS 302 (Part 2/Sec 9)
Plugs, sockets and switch-socket outletsFMCSIS 1293 (plugs and sockets); Electrical Accessories (Quality Control) Order, 2023 - IS 15787
Two-wheeler rider helmetsFMCSIS 4151:2015
Domestic pressure cookers and their rubber gasketsFMCSIS 2347:2017 (pressure cookers); Rubber Gaskets for Pressure Cookers (Quality Control) Order, 2023 - IS 7466
Mobile phones, laptops/tablets, power banks, TVs, CCTV cameras and recordersCRSElectronics and IT Goods (Requirements for Compulsory Registration) Order, 2021; IS/IEC 62368-1:2023
Mobile phone chargers and power adaptors for IT and audio/video equipmentCRSIS/IEC 62368-1:2023
LED lamps and LED luminairesCRSIS 16102 (Part 1) self-ballasted LED lamps; IS 10322 (Part 5) luminaires; IS 16103 (Part 1) LED modules
Portable sealed secondary (e.g. lithium-ion) cells and batteriesCRSIS 16046 (Parts 1 and 2)
Solar PV modules and related devicesCRSSolar Photovoltaics, Systems, Devices and Components Goods (Requirements for Compulsory Registration) Order, 2017; e.g. IS 14286
Low-voltage switchgear and controlgear (circuit-breakers, switches)OtherScheme-X under the Electrical Equipment (Quality Control) Order, 2020; e.g. IS/IEC 60947-2
Industrial chemicals, polymers and polyester/viscose fibresOtherMany of these QCOs were rescinded in October-December 2025 (e.g. PTA, ethylene glycol, polyethylene, PP, PVC, polyester fibres and yarns, viscose staple fibre). Some chemical QCOs remain; check the current BIS list for each product.

Paperwork

Documents usually required

Choose a scheme to see only the documents it needs.

0 of 15 ready
  1. One application per product or Indian Standard, per factory. For CRS, one per brand unless the brand owner is the same.Both
  2. For CRS, add the AIR's notarised affidavit-cum-undertaking on INR 100 non-judicial stamp paper (Form III A or III B).Both
  3. FMCS: recent report from an accredited independent lab or the factory's own lab (BIS then tests samples drawn at inspection). CRS: original report from a BIS-recognised lab, no older than 90 days.Both
  4. Show where in-process quality checks are made.FMCS
  5. FMCS
  6. Tests not done in-house need a justification and a consent letter from the outside lab.FMCS
  7. For CRS, safety-critical components are listed in the test report or construction data form.Both
  8. Must be a permanent employee, not a consultant.FMCS
  9. Used to plan the BIS inspection visit.FMCS
  10. FMCS
  11. FMCS needs an undertaking for each brand name; CRS lists the brand on the registration.Both
  12. Must be signed by the applicant or its authorised Indian entity.CRS
  13. FMCS fees are paid in USD equivalent by bank transfer (SWIFT/RTGS/NEFT) for non-SAARC applicants.Both
  14. FMCS
  15. Given at grant stage, not with the first application.FMCS

Ticks are saved in this browser only.

Before you ship

Avoid these common mistakes

Tick each point as you check it before shipping.

0 of 9 checked

FAQ

BIS certification for India — questions and answers

Products covered by a Quality Control Order (QCO). They include steel products, toys, footwear, cables, many household electrical appliances, helmets, pressure cookers, and electronics and IT goods such as mobile phones, laptops, chargers, power banks, TVs, CCTV, LED lamps and lithium batteries, plus solar PV goods. BIS publishes the current lists for Scheme-I (ISI mark) and Scheme-II (CRS). Send us your product through the form and we confirm the exact standard and scheme.

No. A BIS licence or CRS registration is granted to the actual manufacturer for a specific factory and product. An importer cannot use a licence from another factory, and for CRS, test reports from a trader are not accepted. The importer's role is to make sure the supplier is certified before shipping. For CRS, an importer or distributor with a marketing tie-up can act as the manufacturer's Authorised Indian Representative.

An Indian resident nominated by the foreign manufacturer who accepts legal responsibility for compliance with the BIS Act, is named on the licence or registration, and must stay in place for the whole life of the licence. Every foreign manufacturer needs one.

Under FMCS (Scheme-I), BIS officers inspect the overseas factory before granting an ISI-mark licence. Under CRS (Scheme-II), used for electronics and IT goods, registration is based on a test report from a BIS-recognised lab in India and the manufacturer's declaration, normally without a factory visit. The product then carries the BIS Standard Mark with an R-number.

BIS says an FMCS licence is generally granted within about six months of receiving a complete application. For CRS, the BIS portal gives about 20 working days for grant once the application is complete, plus the lab testing time. Complete documents are the biggest factor in speed.

Customs will not clear products covered by a QCO unless they carry a valid BIS mark and licence or registration. The rules apply by the date the goods land, so consignments arriving after a QCO takes effect must already be certified and marked.

Yes. From February 2026, licence fees are paid every year in advance with a production statement. Missing the due date suspends the licence automatically and can lead to cancellation. We track due dates and renewals for our clients.

Fill in the BIS enquiry form on this page with your product, factory location and number of models. Our BIS team replies in writing within 2 working days with the scheme, standard, document list and a fixed quote.

1 · Your product
Scheme (required)
Where are you now? (required)
2 · Your details

Free enquiry · No obligation · Privacy