Gulshan Marwah · Mindware · IEC 0510059732 · New Delhi

BIS Approval Roadmap for Foreign Manufacturers

Step by step to a BIS CRS registration or ISI licence (FMCS) for foreign manufacturers: Authorised Indian Representative, lab testing, factory inspection, fees and timelines.

Free BIS check for my product

India makes Bureau of Indian Standards (BIS) certification compulsory for hundreds of products through Quality Control Orders (QCOs) and similar orders issued by central ministries under the BIS Act, 2016. For a covered product, nobody may manufacture, import, sell or distribute goods that do not conform to the named Indian Standard and do not carry the BIS Standard Mark under a valid licence or registration, so covered goods without it are not cleared at Indian customs. A foreign factory must therefore get its own BIS licence or registration, through an Authorised Indian Representative, before shipping.

Steel, toys, footwear, appliances…

Foreign Manufacturers Certification Scheme (FMCS) - ISI mark (Scheme-I)

Typical time: BIS's FMCS FAQ says a licence is generally granted within about six months of BIS receiving a complete application. Delays can come from incomplete papers, arranging the overseas inspection, and sample testing.

Factory inspection: Yes. BIS officers inspect the overseas factory before grant and during surveillance. BIS treats all FMCS visits as special visits; the applicant pays per-man-day charges plus travel, visa, insurance and per-diem costs.

Electronics, IT, solar

Compulsory Registration Scheme (CRS) - Standard Mark with R-number (Scheme-II)

Typical time: The CRS portal says normal time for grant is 20 working days, processed first come first served, once a complete application is received. Lab testing time comes on top of this and depends on the lab.

Factory inspection: Not normally required for grant. Since February 2026 the regulations list Scheme-II as a scheme 'without any assessment at site'. Conformity rests on the lab test report and the manufacturer's self-declaration, followed by market surveillance.

Foreign Manufacturers Certification Scheme (FMCS) - ISI mark (Scheme-I)

Applies to: Products named in a QCO that requires the ISI mark under Scheme-I of the BIS (Conformity Assessment) Regulations, 2018, for example steel products, toys, footwear, cables, many household electrical appliances, helmets and pressure-cooker items. Check the product and its Indian Standard (IS) on the BIS list 'Products under Compulsory Certification - Scheme I'.

  1. 1Identify the Indian Standard and QCO that cover the product, and check the product's varieties against that standard.
  2. 2Nominate an Authorised Indian Representative (AIR) who lives in India, using the BIS nomination format.
  3. 3Prepare the document set from the BIS FMCS checklist, including recent test reports showing the product meets the Indian Standard.
  4. 4Apply online on the Manakonline portal and pay the application fee. BIS stopped accepting paper applications after 31 May 2026.
  5. 5BIS records the application, then BIS officers inspect the overseas factory. The applicant pays all visit costs.
  6. 6Samples drawn during the inspection are sealed and sent to BIS labs or BIS-recognised labs in India for independent testing, at the applicant's cost.
  7. 7If the inspection and test results are satisfactory, BIS grants the licence. The licensee accepts the Scheme of Testing and Inspection (STI) and the marking-fee rate, signs the BIS agreement and submits a performance bank guarantee.
  8. 8Apply the ISI mark only to goods covered by the licence, run the in-factory testing plan, pay annual fees with a production statement, and expect BIS surveillance inspections and market samples.
Authorised Indian Representative
Mandatory. The AIR must be an Indian resident: preferably the head or a senior person of the manufacturer's Indian branch or liaison office, or another legally appointed person if there is no such office. The AIR accepts responsibility for compliance with the BIS Act, is named on the licence, must appear before BIS when required, must help BIS draw samples from imported consignments, must have no conflict of interest with testing labs, and can normally represent only one manufacturer (related group companies and importers are an exception). BIS must be told before any change of AIR.
Testing
Samples drawn during inspection may only be tested in BIS's own labs or BIS-recognised labs. The applicant ships them to the lab and pays the testing charges. The factory must also have its own testing facilities, or arrangements approved by BIS, to run the routine testing plan.
Marking
ISI mark (Standard Mark) with the IS number and the licence number (CM/L-...) shown on the product and/or its packaging.
Government fees
BIS fee list for FMCS (same as for domestic manufacturers; non-SAARC applicants pay the USD equivalent): application fee INR 1,000 (non-refundable); special visit charges INR 7,000 per man-day, plus ticket, visa, insurance and per-diem costs at BIS rates; contingency fund payment INR 10,000; testing charges as applicable; annual licence fee INR 1,000; renewal application fee INR 1,000; marking fee as applicable to the product. Bank charges and exchange-rate differences are on the applicant. Performance bank guarantee: up to USD 10,000 on the BIS format, issued by a bank with an RBI-approved branch in India and routed through that branch.

Source: https://www.bis.gov.in/fmcs/fmcs-faqs/?lang=en

Compulsory Registration Scheme (CRS) - Standard Mark with R-number (Scheme-II)

Applies to: Electronics and IT goods named in the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, as amended (for example mobile phones, laptops and tablets, power adaptors and chargers, power banks, TVs, CCTV equipment, LED lamps and luminaires, and portable lithium cells and batteries). Solar PV goods under the MNRE order are also covered. Check the BIS 'Scheme II - Registration Scheme' list.

  1. 1Confirm that the product and model fall within the Order and identify the applicable Indian Standard.
  2. 2Send samples to a BIS-recognised laboratory, listed on the BIS website, and get a test report against the Indian Standard. A report from the manufacturer's own lab or from an overseas lab such as a CB/CE/UL test lab is not accepted.
  3. 3Foreign applicants nominate an Authorised Indian Representative. The AIR signs a notarised affidavit-cum-undertaking on Indian stamp paper.
  4. 4Apply online with the test report, the undertaking that the product conforms, affidavits, brand details and the fee. Each product needs its own application, and each brand needs its own application unless the brand owner is the same.
  5. 5BIS checks the application and test report, raises any queries online and grants the registration, issuing the R-number licence document.
  6. 6Mark the products, notify BIS of any changes, add new models by paying the inclusion fee (with lab validation or test reports), and pay annual fees. BIS can test samples taken from the market or from goods in transit.
Authorised Indian Representative
Required for foreign manufacturers (Form-IV in Scheme-II). In order of preference, the AIR is: the manufacturer's Indian liaison office, subsidiary or branch; or, if there is none, the brand owner or trademark user's office in India; or, if neither exists, a major importer or distributor with a marketing tie-up. The AIR signs a notarised affidavit-cum-undertaking accepting liability for compliance and BIS dues, countersigns applications and renewals, and must have no conflict of interest with BIS-recognised labs.
Testing
Only BIS-recognised laboratories, listed per product and standard on the BIS/CRS website, can test for registration. Under the CRS FAQ the report must be no older than 90 days when the application is submitted.
Marking
BIS Standard Mark (the registration mark) with the IS number above it and the registration number 'R-XXXXXXXX' below it. Put it on the product and/or packaging, with a reference to the BIS website (www.bis.gov.in). Devices with a built-in screen may also show the mark electronically (e-labelling), but the packaging still needs a physical label.
Government fees
Scheme-II fees in the BIS (Conformity Assessment) Amendment Regulations, 2026: application fee INR 1,000; annual licence fee INR 1,000; renewal application fee INR 1,000; processing fee INR 25,000 per application, payable yearly in advance; INR 20,000 for each extra test report; INR 30,000 per application to add new models or extend scope; INR 5,000 per service request (for example a change of name, address, management, Indian representative or contact details). Surveillance sample and testing costs are paid by the licensee. Lab testing fees are charged separately by the lab. The concessions for micro and small enterprises and start-ups apply to Indian MSMEs as defined in Indian law.

Source: https://www.crsbis.in/BIS/howtoapply.do

Mistakes that delay approval

  • Get the licence or registration before goods are shipped. For imports, India applies the rules by the date the goods land, so consignments arriving after a QCO takes effect must already be certified and marked.
  • Each licence is tied to one factory address and one product or Indian Standard. A second factory, a different standard, or (for CRS) a different brand owner needs its own application. Licences cannot be transferred, and moving the factory means stopping use of the mark and telling BIS.
  • A licence from one brand's or supplier's factory does not cover goods made elsewhere. For CRS, test reports supplied by a trader or supplier are not accepted; the actual manufacturer must hold the registration.
  • Marking must match the licence exactly: the Standard Mark with the IS number and licence or R-number, product details, and (for CRS) a reference to the BIS website. Do not mark models outside the licence scope.
  • The Authorised Indian Representative carries legal liability and must stay in place for the whole life of the licence. Changing the AIR needs advance notice to BIS and, for CRS, a fee.
  • From February 2026 fees are payable every year in advance with a production statement. Missing the due date suspends the licence automatically and can lead to cancellation, so track due dates.
  • Indian Standards are revised over time. Licensees must move to new editions by the dates BIS sets; for example, electronics registrations were moved to IS/IEC 62368-1:2023.
  • Many QCOs are amended, deferred, suspended or withdrawn. In 2025-2026 India rescinded dozens of chemical, polymer, fibre and non-ferrous metal QCOs, withdrew the machinery omnibus order (January 2026), and temporarily suspended some others. Check the current BIS list and the gazette before planning shipments.
  • For FMCS, budget for the cost and lead time of BIS officers travelling to the factory, and for shipping samples to labs in India. Certification is not complete until the agreement and bank guarantee are in place.

Checked against official BIS sources on 2026-10-28. Rules change; we re-check your product before filing.